Pool Inspections

A “Deep Dive” pool inspection. Hundreds of points inspected—including safety, condition, and operation—yielding a detailed report you will reference for years.

I perform a “Deep Dive” pool inspection (pardon the pun) because pools can be deceiving.

A pool can look immaculate and be on its last leg, and another can look horrible and just need a little love, and believe it or not, the smaller photos here are all the same pool. Most pools fall somewhere in between, and telling the difference takes a seasoned, trained eye. Let me be the judge of that.

Hundreds of Points, One Detailed Report

Hundreds of points are inspected, tested, and observed. Whether you are a first-time pool owner or a pool pro, the report becomes an invaluable reference, for identifying the components, understanding how the system works, and knowing what to look for and what to look out for, now and for years to come.

Winterized Pools, Too

Even a winterized pool should be inspected. It is usually covered and can’t be run, but the parts, piping, mechanicals, and the pool itself can still be evaluated and a valuable report produced.

What's Included:

Adequate fencing, gates, barriers, alarms, and protective devices
Deck, steps, and surfaces leading to the pool in normal condition
Decks solid on all sides and separated from the pool wall perimeter
No standing puddles on the deck
Ladders, stanchions, chairs, and rails in normal working condition
No unpleasant odors or irritating fumes present
No physical damage apparent at the pool equipment
Drain grates visible from the deck with no apparent damage
Drain covers and water return inlets installed
Water clean and clear, no debris, discoloration, or visible algae
Water quality and chemical levels within acceptable ranges at last test
Water temperature measured and recorded
Heater type, efficiency, and BTU rating identified
Heater on a level, non-combustible base with safety devices installed
Heater bonding and grounding visible; installed downstream of pump and filter
Pool chemicals stored a safe distance from the heater
Adequate clearances maintained around the heater
Coping stones and tiles not chipped, cracked, or loose
Pool surface smooth, without visible defects or staining
Water level maintained for debris removal and continuous gutter/skimmer overflow
Skimmer weirs, baskets, deck covers, and flow-adjustment devices installed
Lights installed and operational; number of underwater lights noted
GFCIs installed; no electrical wiring passing over the pool or spa
Diving board free of defects or signs of repair, manufacturer visible
Filtering pump secured to its base and operating quietly
Hair and lint strainer basket clean of debris
Pipe type identified; pipes and fittings not leaking and adequately supported
No calcification, corrosion, or deterioration on piping
Air pressure-relief valves installed on all pressure filter tanks
Filter tanks accessible; filter brand identified
Clean sight glass or visual outfall of at least 3 feet provided
Filter tanks and hair/lint traps sealed and not leaking
System piping, filters, and components labeled, tagged, or color-coded

Pool Inspections